Waterless Trap Seals for Every Drain Size. Shop All Products
Green Drain GD 3-3.5 inch EG waterless trap seal with extended gasket
Main
Cross
Section
Exploded
Available in APAC Region GD 3-3.5" EG

3-3.5" EG Waterless Trap Seal

Extended gasket design bridges 3" to 3.5" drain openings for maximum compatibility across APAC plumbing systems. WaterMark certified.

Contact Us for International Availability
Pipe Size 3-3.5" (DN 75-90mm)
Flow Rate 105.70 L/min
Install Time 30 Seconds
WaterMark Certified
ASSE 1072 Tested
International Orders Available

How it works.

Four flexible silicone sealing ribs form a one-way valve. Water and debris pass through under gravity. Commercial wash-down volumes, mop water, and kitchen runoff all drain normally.

When flow stops, the ribs close to create a continuous mechanical seal that blocks sewer gas, odors, and pests from entering the occupied space above.

The GD 3-3.5" EG features an extended gasket that accommodates pipe diameters from 75 to 90mm, bridging the gap between standard 3" and 3.5" drain openings common in APAC plumbing systems.

Green Drain cross-section diagram showing one-way valve open during flow and closed to block sewer gas and pests

Installs in 30 seconds. No tools.

1
Step 1: Remove the drain grate

Remove the drain grate

Lift the existing drain grate or strainer from the floor drain body.

2
Step 2: Drop in the Green Drain

Drop in the GD 3-3.5" EG

Place the Green Drain into the drain body or hub opening.

3
Step 3: Press gently to seat

Press gently to seat

Recess 2 to 4 inches below the pipe top. The extended silicone gasket creates a snug seal against the pipe walls.

4
Step 4: Replace the drain grate

Replace the grate

Put the grate back. Done. A full commercial floor in an afternoon.

ASSE 1072 tested. The data that matters.

The GD 3-3.5" EG is tested to ASSE 1072-2020, the North American performance standard for barrier-type floor drain trap seal devices. WaterMark certified for the APAC market.

105.70 L/min Flow Rate (Level U) No restriction to commercial drainage.
32g Opening Force Approx 4 oz. Opens under minimal water weight.
2,500+ Cycle Endurance ASSE 1072 tested open/close cycles.
>96% Evaporation Reduction Keeps trap seal intact without water priming.
For Architects & Engineers

Specify Green Drain in your next project.

Download the Revit family set for every Green Drain model, and find us listed in BSD SpecLink and MasterSpec.

Technical Specifications

ModelGD 3-3.5" EG
Pipe Size3-3.5" (75-90mm) / DN 80-90
Height50 mm
Housing MaterialABS Plastic
Valve MaterialSilicone Rubber
Seal MaterialSilicone Gasket (Extended)
Flow Rate105.70 L/min
ASSE 1072 Opening Force32 grams
ASSE 1072 Cycle Life>2,500 cycles
ASSE 1072 Evaporation Reduction>96%
WaterMark LicenseWM-022837 (DN80)
PatentsMultiple US & international patents

Industries we serve.

The extended gasket design bridges 3" to 3.5" drain openings for compatibility across APAC plumbing systems.

Certifications and compliance.

Green Drain WaterMark Australia certification WM-022837 DN80

WaterMark Australia

WM-022837 (DN80)

ASSE 1072-2020 Standard

Barrier-type trap seal performance standardEvaluated under IAPMO R&T cUPC File No. 9301

Green Drain HACCP International food safety endorsement

HACCP International

Certificate RG-04

Green Drain NSF/ANSI 2 food equipment certification

NSF/ANSI 2

Food Equipment Certified

SGS

SGS Pathogen Test

>99.9% blockage of viral aerosols

Green Drain tested by Danish Technological Institute DTI

DTI Tested

Rapport 957187

Interested in this product?

Contact our team for international orders and distributor inquiries.