Waterless Trap Seals for Every Drain Size. Free Shipping Over $100 AUD
Green Drain GD 3.5-4 inch EG waterless trap seal for Australian floor drains
Main
Cross
Section
Exploded
APAC Exclusive GD 3.5-4" EG

3.5-4" EG Waterless Trap Seal

Extended gasket design bridges 3.5" to 4" drain openings for seamless compatibility across Australian plumbing systems. WaterMark certified.

$59.70 AUD

Inc. GST. Free shipping on orders over $100 AUD. $10 flat rate standard shipping.

Pipe Size 3.5-4" (DN 90-100mm)
Flow Rate 323.17 L/min
Install Time 30 Seconds
WaterMark Certified
ASSE 1072 Tested
Free Shipping Over $100

How it works.

The GD 3.5-4" EG features an extended gasket that accommodates pipe diameters from 90 to 100mm, bridging the gap between standard 3.5" and 4" drain openings common in Australian plumbing systems.

Four flexible silicone sealing ribs form a one-way valve. Water passes through under gravity. When flow stops, the ribs close to create a continuous mechanical seal that blocks sewer gas, odors, and pests.

The valve opens under the weight of just 32 grams, approximately 4 oz of water. High-volume wash-down flows up to 323.17 L/min move through without restriction.

Green Drain cross-section diagram showing one-way valve open during flow and closed to block sewer gas and pests

ASSE 1072-2020 Performance Data

Independently tested by IAPMO R&T. These are lab-verified results from an accredited third-party testing laboratory.

323.17 L/min Flow Rate (Level U) No restriction to drainage.
32g Opening Force Opens with approximately 4 oz of water.
2,500+ Cycle Endurance Open/close cycles tested and passed.
>96% Evaporation Reduction Maintains trap seal without water.

Technical Specifications

ModelGD 3.5-4" EG
Pipe Size3.5-4" (90-100 mm) / DN 90-100
Height50 mm
Housing MaterialABS Plastic
Valve MaterialSilicone Rubber
Seal MaterialSilicone Gasket (Extended)
Flow Rate323.17 L/min
ASSE 1072 Opening Force32 grams
ASSE 1072 Cycle Life>2,500 cycles
ASSE 1072 Evaporation Reduction>96%
WaterMark LicenseWM-022837 (DN100)
PatentsMultiple US & international patents

Installs in 30 seconds. No tools.

1
Step 1: Remove the drain grate

Remove the drain grate

Lift the existing drain grate or strainer from the floor drain body.

2
Step 2: Drop in the Green Drain

Drop in the GD 3.5-4" EG

Place the Green Drain into the drain body or hub opening. The extended gasket accommodates DN 90-100mm pipes.

3
Step 3: Press gently to seat

Press gently to seat

Recess 2 to 4 inches below the pipe top. The extended silicone gasket creates a snug seal against the pipe walls.

4
Step 4: Replace the drain grate

Replace the grate

Put the grate back. Done. A full commercial floor in an afternoon.

Where the GD 3.5-4" EG is used.

The 3.5" to 4" drain size covers a wide range of Australian commercial plumbing installations. The extended gasket ensures a secure fit across DN 90-100mm pipe diameters.

Certifications and compliance.

Green Drain WaterMark Australia certification WM-022837

WaterMark Australia

WM-022837 (DN100)

Green Drain ASSE 1072-2020 barrier-type trap seal certification

ASSE 1072-2020

Trap seal performance standard

Green Drain CE Mark European Technical Assessment ETA-18/0536

CE / ETA-18/0536

European Technical Assessment

Green Drain NSF/ANSI 2 food equipment certification

NSF/ANSI 2

Food Equipment Certified

Green Drain HACCP International food safety endorsement

HACCP International

Certificate RG-04

Green Drain tested by Danish Technological Institute DTI

DTI Tested

Rapport 957187

SGS

SGS Pathogen Test

>99.9% blockage of viral aerosols

What operators are saying.

"4 months have gone by and I have yet to have a single complaint or concern since the Green Drains were installed."

Winston Andrews, CEO

Pleasanton Unified School District

"Once installed the Green Drain solved our issues. No more need to flush the drains or add enzymes. This product really works!"

Jeff Bowe, Project Manager

Raven Services Corporation (14-story federal complex)

"We have used the following product in all of our bathroom drains, and this has not only eliminated our odor problem, but it has made our internal customers safer."

Mike Malone

FedEx Corporation

For architects and engineers.

The GD 3.5-4" EG is designed for Australian plumbing systems compliant with AS/NZS 3500. For WaterMark certification details, ASSE 1072-2020 performance data, and the complete certification matrix, see the Architects and Engineers technical page.

WaterMark License WM-022837
Pipe Compatibility DN 90-100 (3.5-4")
Patents Multiple US & international patents
View A&E Resources
Technical Drawing
or Spec Sheet Preview
~500x400px

Ready to protect your drains?

Drop-in install. No tools. Works from day one.