Section
1.25" Waterless Trap Seal
Fits 1.25" (DN32) drain outlets. Drop-in install, no tools required.
Inc. GST. Free shipping on orders over $100 AUD. $10 flat rate standard shipping.
How it works.
Green Drain is a one-way valve for your drain. Water flows down and out. Nothing comes back up.
Inside sits a soft silicone valve. Running water pushes it open; the moment the water stops, it closes and seals tight against sewer gas, odours, and pests. Because it seals with silicone instead of water, it never dries out the way an ordinary trap can, even when the drain goes weeks without use.
It fits 1.25-inch drains and drops in by hand. No tools, no plumber, installed in seconds.
Installs in 30 seconds. No tools.
Remove the drain grate
Lift the existing drain grate or strainer from the drain outlet.
Drop in the GD125
Place the Green Drain into the drain outlet or hub opening.
Press gently to seat
Recess 2 to 4 inches below the pipe top. The silicone gasket creates a snug seal against the pipe walls.
Replace the grate
Put the grate back. Done. Protection starts immediately.
Specify Green Drain in your next project.
Download the Revit family set for every Green Drain model and find us listed in MasterSpec.
Technical Specifications
| Model | GD125 |
| Pipe Size | 1.25" (32 mm) / DN32 |
| Height | 26 mm |
| Housing Diameter (no gasket) | 30.27 mm (1.192") |
| Housing with Gasket | 40.22 mm (1.583") wide x 27.45 mm (1.081") |
| Housing Material | ABS Plastic |
| Valve Material | Silicone Rubber |
| Seal Material | Silicone Gasket |
| Flow Rate | 29.22 L/min |
| WaterMark License | WM-022837 (DN32) |
| Patents | Multiple US & international patents |
Industries we serve.
The GD125 fits 1.25" (DN32) fixture drain connections.
Certifications & endorsements.
Green Drain holds five product certifications. Additional endorsements, independent test reports, and compliance declarations are listed separately below.
Certifications
cUPC Listed
IAPMO R&T File 9301
WaterMark Australia
WM-022837 (DN32)
NSF/ANSI 2
Food Equipment Certified
CE / ETA-18/0536
European Technical Assessment
Endorsements, test reports & declarations
ASSE 1072-2020 Standard
Barrier-type trap seal performance standardEvaluated under IAPMO R&T cUPC File No. 9301
HACCP International
Food Safe endorsement (RG-04)
SGS Aerosol-Retention Test
Retained over 99.9% of an aerosolized MS2 bacteriophage viral surrogate
DTI Tested
Independent test report (Rapport 957187)
Prop 65 Compliant
California compliance declaration
VA Godkendelse
Danish plumbing approval declaration
IAPMO R&T
Accredited testing laboratory
Ready to protect your drains?
Drop-in install. No tools. Works from day one.